Kathrein Sets New Standards for Digital Single-cable Multiswitches
By using a rotary switch, you can set various user band configurations for the two outputs of the input cable. With 2 x 16 (32) user bands, two parallel large distributions can be realized. The structural conditions require an asymmetrical distribution, such as also 24/8 or 30/legacy can be selected. The version with 24/8 user ribbons is particularly advantageous for plants, in which new Sat>IP- Server EXIP 4124 or multi-tuner receiver such as the UFSconnect 926 fully demonstrate the user bands offered.
The "lower" 8 user bands can be addressed if necessary with the 'old' EN 50494 single cable standard when required, so that the installer through skilful distribution can also satisfy the owner of older single-cable receivers.
The single-cable standards EN 50494 and EN 50607 are each implemented with PIN-code. Both digital single cable multi-switch feature automatic gain adjustment (AGC) for both outputs, as well as "Kathrein Power-Saving" for an optimum energy balance.There is also an adjustment for future wideband technology, which allows multi-feed reception with two wideband LNBs.
Download as pdf ( May 2016 | en )
- Download as png ( May 2016 | en | 2 MB )
© KATHREIN-Werke KG, Rosenheim
All published press releases and photos are to be used for editorial purposes only. KATHREIN-Werke KG reserves all rights. If press photos are duplicated or changed, they have to be marked with "Copyright © KATHREIN-Werke KG Rosenheim".